RSF
RSF (FR-13.HB5.1.DNP) Thermodisc Snap Switch | Replaces FO-FDHC6-A02
Snap disc thermostat sensor used on most RSF fan kits and blower assemblies. Operating range is typically 110/120°F with a -20°F shutoff. RSF Models: RSF Delta (& RSF...
The FO-HB9 universal fan blower kit replaces all previous 1996+ generation RSF fan kits, including the FO-FDHB5-N and the FO-FDHB8. The new centrifugal blower design produces nearly 10 times the static pressure then its predecessors and uses a ball bearing Class H insulated motor for reliability and heat tolerance. The included universal mounting plate allows the blower to be adapted easily to older models. Adding this blower will significantly improve the circulation of heated air in the room the fireplace is installed.
The complete kit includes the blower, universal mounting plate, 3-prong power cord, quick connect terminals, fork connectors for terminal block power, automatic thermostat sensor, variable speed controller, all necessary hardware and installation instructions. The FO-HB9 replaces all previous blower kits and blowers, so it is recommended for anyone installing a blower for the first time or replacing an existing blower.
Please see compatibility guide below before purchasing. The blower kit is NOT to be installed when used with Clean Face finishes.
For more information on the benefits of ball bearing blowers, read our How Does a Fireplace Blower Work? article.
Specifications
|
|
---|---|
Dimensions | |
L x W x H | 12.8" x 4" x 4.25" blower only, 12.8" x 4.5" x 5" w/ bracket |
Air Discharge | |
Blower, Motor & Bearing | |
Type | AC Shaded Pole |
Rotation | CCW |
Blade Type | Metal |
Housing Material | Steel powder coated black |
Bearing Type | Ball |
Outboard Bearing Type | N/A |
Bearing Lubrication | High Temp |
Motor Insulation | Class H (rated to 392°F) |
Motor RPM | 3000 |
Motor Connection | Male spade terminals on pigtail wiring lead |
Variable Speed Compatible | Yes |
Air Flow | |
CFM | 160 |
Installation | |
Mounting Type | Universal mounting bracket fits 1996+ RSF models |
Electrical | |
Volts | 120 |
Motor Frequency | 60 Hz |
Watts | 60 |
Amperage | 0.75 |
Power Cord | Included |
Power Cord Length | 6 ft |
Power Cord Type | 3-Prong Grounded |
Accessories | |
Included | 3-prong power cord, bracket, terminal block wiring harness, t-stat snap switch, rheostat speed controller, wall cover plate, hardware |
Noise Reduction Padding & Velcro | Rubber insulation feet for bracket |
Other | |
Packaging Materials | Shipping box, bubble wrap, foam and / or paper |
Compatibility | |
ICC-RSF | Pearl, Pearl 3600, Topaz, Chameleon, Chameleon 2, Delta, Delta 2, Delta Fusion, Opel, Opel 2, Opel 3, Opel 2000, Opel AP, Focus 320, Focus 3600, Focus SBR, Focus ST, Onyx, Onyx AP, Oracle |
Documents | |
Installation Instructions | Download |
Only issue I had was the 2 wires coming off the fan. 1 black and 1 white, the directions did not clearly state if on was hot or neutral. A quick question and a fairly fast response from the seller that it didn't matter and which terminal the wires went to and I had the fan in and operational.
Replaced a very large bulky old blower with this unit. We have a Delta model RSF. Much quieter than the original one, so I'm a happy camper. Service was spectacular.
Fits my model, no complaints so far.